[Home | Experimental Aircraft | JT-5 Autogyro |3D Modeling ]
JT-5 Autogyro
Materials & Suppliers
Questions and answers
Drawing Additions
Technical Photo Gallery
Pod and Canopy sections
Materials & SuppliersThese pages have been created to help builders in various countries to complete their JT-5 autogyro project. I shall add new pictures and text every now and then to explain details and answer builder questions. So, the pages are a kind of a FAQ pages.
A NOTE TO ALL JT-5 BUILDERS!!!!
Please, help me in making this materials page better. Any information on material sources in US and Europe needed to build the JT-5 is well come. Please include www and e-mail address of the suppliers if available.
The following is my wish list, but you can add more:
- Steel tubing, especially oval shapes
- Glass Fabric and Rowing
- Aircraft quality epoxies, preferably safe types with pot lifes from fifteen minutes to 6 hours.
- Canopies
Practically everything:
WICKS AIRCAFRT SUPPLY: http://www.wicks.com/aircraft/
E-Z POXY EPOXY LAMINATING SYSTEMS
In early 1996, Composite Design Co. developed E-Z Poxy to provide a replacement epoxy system for Epolite (Safe-T-Poxy) which is no longer produced by Hexcel . . The E-Z Poxy series of laminating systems utilizes one resin and your choice of three hardeners for varying pot life and viscosity requirements. The E-Z Poxy systems offer the same handling and physical properties as the discontinued Epolite systems including ease of use, long pot life, rapid cure for demold or process continuation, and superior room temperature curing properties. Excellent for use in sport aviation, marine, and industrial applications.
E-Z 83 hardener is equivalent to Safe-T-Poxy standard hardener, E-Z 84 is equivalent to Safe-T-Poxy II hardener, and E-Z 87 is equivalent to Safe-T-Poxy slow hardener. E-Z Poxy products shouls not be mixed with materials produced by other epoxy manufacturers.
http://www.aircraft-spruce.com/spruce/pages.cgi/page29
http://www.aircraft-spruce.com/spruce/pages.cgi/compositetoc?
Epoxies:
I am using this epoxy at present, it is available locally in Helsinki. For more information, please read the SP Ampreg 20 data sheet page I have included.
SP Ampreg 20 Epoxy Laminating system.
Resin to hardener ratio 100:25 by weight and 100:29 by volume.
Features good mechanical propertie, DDM (MDA) and Phenol-free, Low viscosity, Good water and weathering resistance, Generous working times, Good HDT, Usable with Ampreg Ultraslow hardenerStructural Polymer Systems Limited.
Love Lane Cowes. Isle of Wight. PO31 7EU
United Kindom
Fiberglass & Carbon Fiber:
Northern Fiber Glass Sales, Inc.
102 Tide Mill Road ¨ PO Box 2010 ¨ Hampton NH 03843
TEL 603-926-1910 ¨ FAX 603-926-0598
Email: nfgs@nfgsales.com
http://www.nfgsales.com/sitemap.htm
General Information in German:
Handbuch Faserverbundwerkstoffe
Info`s zu den Warengruppen:
Epoxydharze + Härter
Verstärkungsfasern und Füllstoffe
This is the supplier which has been used extensively in Finland:
The web site will open Dec. 1, 1999.
Aircraft Quality Steel Tubing:
http://plymouth.com/2.3.1e.html
http://www.univair.com/raw-materials/view-all/3890c35-streamline-tube-section-623-123-5-inches/
http://www.twmetals.co.uk/index.htm
http://www.great-atlantic1.com/product_listing.html
Plexiglass Canopies:
http://home.inreach.com/thermotc/
http://www.aerotechacrylic.com/
Questions and answers
Drawing Additions
Technical Photo Gallery
Pod and Canopy sections
Materials & Suppliers[Home | Experimental Aircraft | JT-5 Autogyro |3D Modeling ]